close
close

How To Light Pilot Light On Gas Fireplace Insert

How To Light Pilot Light On Gas Fireplace Insert. Push in knob (this releases the gas to the pilot area only). Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace.

How To Light A Gas Fireplace Insert My Hobby
How To Light A Gas Fireplace Insert My Hobby from herbabetobatdiabetes.blogspot.com

If the on switch is left on for more than 60 seconds and the pilot does not light the fireplace will go into lock out mode. Locate the gas turn on knob near the back of the fireplace and turn the knob to the 'on' position. It measures heat from the pilot flame on the thermocouple, and if anything is even slightly off, the valve will snap closed and shut off the fire.

This Continuous Flame Is Necessary To Light Large Burners Such As Those Found In Gas Fireplaces.

Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace. How to light a pilot on a majestic fireplace locate the gas line that enters your house (normally in the basement of the home) and make sure the inline valve is turned to the 'on' position. A gas fireplace pilot light, which can also be referred to as just the pilot in a gas fireplace, is an important part of gas fireplace design and essential for helping gas fireplace flames to start quickly and efficiently.

A Standing Pilot Light Is A Small Flame That Burns Even When Using The Fireplace In Most Gas Fireplaces.

Always remove your fireplace glass prior to lighting your pilot * if you do not see a red or black spark ignitor button, you do not have a manual ignition system. Our own gas fireplace insert is an older model and the pilot light is the standing flame type rather than the intermittent pilot ignition found often found. A pilot light is a small flame that is kept alight using a steady, small stream of gas.

A Standing Pilot Is Always On, Always Using A Small Amount Of Gas To Run Constantly Unless The Gas Is Physically Turned Off.

How to light your pilot. At that point, you can then turn the knob to the on position. If the on switch is left on for more than 60 seconds and the pilot does not light the fireplace will go into lock out mode.

If Gas Is Coming Out Of The Pilot, But It Still Won't Light, The Spark Igniter Could Be The Problem.

Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on.if gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem.look for and clear out any debris between the igniter and thermocouple. This means that the pilot flame does not have to be kept on throughout the time when the gas fireplace is on. It measures heat from the pilot flame on the thermocouple, and if anything is even slightly off, the valve will snap closed and shut off the fire.

Examine The Majestic Fireplace And Clean Off Any Dust From The Gas Logs.

Repeat this step as necessary until the pilot ignites. Typically it is a spider we. #gasfireplacerepair #fireplacepilotlight #pilotlightwontstaylitwe show how to easily fix a gas fireplace pilot light to stay lit.

Leave a Reply

Your email address will not be published.